Tag Archives: shuttle

Infinity, Science Fiction, Stargrunt, Terrain

Crashed Shuttle, Part One

Leave a comment

Doing a bit of cleaning up in my boxes of wargaming supplies I rediscovered a shuttle I built at least ten years ago. It was nominally for 15mm science fiction gaming, but was built without visible windows or any other really obvious scale indicators, and it’s big enough to look like a small craft in 28/32mm SF scenery!

Shuttle retrieved from the box it's been half-forgotten in for ages. Landing gear next to it; Infinity figure on 25mm base for scale. Click for larger, as usual.
Shuttle retrieved from the box it’s been half-forgotten in for ages. Landing gear next to it; Infinity figure on 25mm base for scale. Click for larger, as usual.

It’s suffered some damage in storage; one of the stabilizer fins is missing and the landing gear was loose and damaged. Rather than fix it up I figured I’d run with it as a damaged crashlanded shuttle that’s suffered a hard landing but is still basically intact. I added some more damage with a file, then chopped part of the underside away so it would sit slightly nose-down.

Hole in the nose. The original shape was a mouthwash bottle built up with styrene plastic sheet and putty. Click for larger.
Hole in the nose. The original shape was a mouthwash bottle built up with styrene plastic sheet and putty. Click for larger.

I used hot glue to stick the shuttle down to the base, then packed the gap between the ground and the shuttle with a few bits of scrap card, slices of foam from a miniatures blister, and a lot more hot glue.

Shuttle with foam and scraps packed into the gap between the body and the ground. Click for larger.
Shuttle with foam and scraps packed into the gap between the body and the ground. Click for larger.
Other side of the shuttle, also showing the missing tail fin and the extra damage I scratched into it. Click for larger.
Other side of the shuttle, also showing the missing tail fin and the extra damage I scratched into it. Click for larger.

Finally I put a layer of white glue over the foam and base then dumped sand over it. It might need another layer of sand to touch everything up; we’ll see in a day or two once everything dries!

Sand in place; Infinity Daylami on 25mm base for scale. Click for larger.
Sand in place; Infinity Daylami on 25mm base for scale. Click for larger.

More soon once I get the base painted up and touch up the damaged parts of the shuttle!