Wargames Designs is partly a webstore, with some good looking historical wargaming flags in a variety of scales, among other things, but they also have this listing of English Civil War coat colours by regiment, which is also a great resource for ECW-era names.
More on coat colours, and much other good stuff as well over on Keep Your Powder Dry.
Over on the micro-scale gaming side, this really fantastic project to depict Constantinople in 2mm for siege games. This is an ongoing project, so look for more recent updates on that blog when you visit!
I feel like I’ve linked to 6mm ACW before, but that website really does have some great 6mm terrain tips that aren’t just limited to those gaming the Slaveholder’s Insurrection.
My most recent YouTube channel discovery is Miscast out of Australia, with a series of painting and terrain videos that tend to be short (this is good) and well edited (also good). I rather like this How To Make a Crystal Elven Waystone for D&D & AoS, which I’ll also embed below. He’s got an accompanying miscast.co website with some interesting stuff on it.
This is actually cardboard, if you can believe it. Well worth four minutes and a few seconds of your time.
Stay safe, stay sane, and try to keep creating things, faithful readers.
Both Narrow Seas and Coastal Patrol (and probably other naval games, I’m guessing) include rules for the moon being full or partial in their sighting and visibility rules, and a difference if your target is silhouetted against the moon or “down-moon”. They’ve also got rules for star shells and flares, with a different diameter in each game – 12″ diameter in Coastal Patrol, 8″ in Narrow Seas.
Accordingly I decided to crank out full moon, partial moon, and star shell illuminated area markers suitable for both games.
Thumbnail of the full and partial moon markers.
The star shell markers are quarter-circles; you could print four and tape them together, I guess, or just do what I intend to, use the quarter circle as a quick flexible marker for the extent of the illuminated area around a marker denoting the centre of it.
The moon graphic was originally from OpenClipArt.org, still a useful site but much, much messier than it used to be. I suspect the moon in that image was pulled in from elsewhere on OpenClipArt, but searching that site has become harder and harder. I cut mine out separately with a circle cutter then glued them back to back for ease of use.
I’ve done four simple 3d starshell/flare markers for use on the tabletop to mark the centre of an illuminated area and the actual star shell location, each a length of wire on a 25mm MDF base with tufts of cotton wool for the characteristic smoke/light effect you see in photos of starshells. They’re a bit rough but they work, I think.
Star shells over Iraq. Image via Wikipedia, originally taken by USAF personnel.
The bases are 2mm thick MDF and 25mm wide; I used the same water effects with gloss gel that I use on terrain for this naval projects then did some basic highlighting with white paint to kind of give the effect of light glaring off the water.
Four star shells bracket a really, really unfortunate Royal Navy Fairmile D motor gun boat. Click for larger.
I worked a bit of white glue into the cotton wool so the whole thing was more wargamer-proof and the plumes stand up better.
We’ve only done two games since actually introducing the illumination rules to Coastal Patrol, and it’s fascinating to watch how the illuminated areas are treated like “terrain” to be avoided while maneuvering around the table. They definitely add tactical complexity to the small unit naval game!
For our Forestgrave games I wanted some decidedly weird scenery, stuff from the other side of reality that doesn’t quite look like it obeys physics as we understand it. I wanted a lush, not-quite-overgrown-but-almost faery realm thing going on, what in D&D is called the Faewild.
It turns out that, far as I can tell, that’s not a super common theme for wargaming terrain, which surprised me. Maybe I haven’t discovered the magic search terms in Google or YouTube to let me find the other folks doing weird natural terrain yet. If you know of any, let me know in comments, please!
Anyway, I started with a scrap CD, hot glued some washers to it for ballast (because I knew I wanted my final tree to be five or six inches tall), and then used the light cardstock from a Frostgrave figure box to start forming the trunk, with lots (and lots) of hot glue to hold everything down and together, fill gaps, and add some texture to the trunk.
Initial construction underway. Rolled up and scrunched around light card for the trunks and root structures, washers and tape on the base, and loads of hot glue everywhere. Click for larger.
The stone platform is half inch foam insulation, cut as if it had at one point been octagonal before splitting in half somehow. I spiked a toothpick into the foam and then down into the cardboard of the trunk, and it’s solid enough to hold large metal figures without worrying me, even though it’s only attached to the trunk at a single point.
The whole trunk and roots covered in toilet paper and white glue. Fantastic easy bark texture. Click for larger.
I pushed a couple of toothpicks into the trunk in a few places, securing them with more hot glue, then covered the entire tree with clean toilet paper slathered with white glue. Push it around a bit with a stiff wet paintbrush and extra white glue as needed, let it dry overnight, and it’s fantastic easy cheap bark texture for bigger trees. I first used this on my big jungle trees for Infinity a few years ago, and it’s fantastic.
Black primer everywhere, start of paint on the platform, and grit going down on the base. Click for larger.
Next step was black acrylic craft paint, mixed with a generous amount of white glue for extra strength. That took a while to dry on the tree, so I stuck sand and grit onto the base while it was still wet, as well as adding a few bits of scrap foam for stone blocks.
Foam foliage on the trees, base flock and bushes on the base, paint mostly done on the platform. Frostgrave female wizard facing off against a Reaper demon. Click for larger.
The platform got the same black primer, then various shades of grey, tan, pale blue, and white on the stone. I shaded the centre section with blue ink, then used both pale blue and white as final drybrushed highlights.
The two smaller trees in the photo above, incidentially, were made from wire and hot glue several years ago, got put away unfinished, and I just found them last week while looking for something else. They got extra basing materials and tree foliage alongside the big one, and are finally finished, at least five years after I started them. Yeah, I’m organized.
The base got foam foliage bushes, a base coat of my usual mixed grass flock, patches of several other types of flock, a few mushrooms from Bad Squiddo Games, and then a lot of tufts, both grass and flowers.
Tree complete. Mushrooms, bushes, grass, and flowers on the base in abundance. Click for larger.
The grass and flower tufts are mostly from Rain City Hobbies, who do all sorts of great stuff including a bunch of styles of grass and flower stuffs at really good prices. I’ve been using the flowers on my English Civil War/generic English terrain already, and dailling them up higher to get that fae-touched lush look was the right choice, I think.
Weird tree all finished, front view. For my next trick I need to finish that Frostgrave summoner, her apprentice, the rest of her warband, and the demons she summons… Click for larger.
There’s still room for figures on the base, despite the abundant plant life, and I’m looking forward to doing more scenery like this soon!
And again, if you have a line on good inspiration for this sort of faewild overgrown haunted woods scenery, please let me know!
Painted this guy up fairly quickly over a couple of days, after getting it a few weeks ago from Forge of Ice. I wasn’t sure if I wanted to do the statue up in bare stone, painted, or a mix, but it wound up being mostly painted. Basecoat in black, and then lots of drybrushing in various tans up to a bit of pure white, and then I used inks and washes to add the colour while keeping the drybrushed highlighting visible.
Snake idol, front view. The base is about 1.5″ wide, and the whole thing is just under 2.75″ tall. Click for larger.
The final product looks like an ancient statue painted a very, very long time ago, which seems right for something either in a ruin somewhere or populating an unimaginably old Lost World temple complex!
Rear of the snake idol, nice sculpted folds in the hood and robe. Click for larger.
Closeup of the upper half of the snake statue, just for fun. Click for larger.
I also have this fun sabretooth tiger skin rug in progress, and I like the blends I’ve been getting so far on the fur, thanks partially to using glaze medium. Just a few details to finish up on this one.
Just the right decoration for a timetraveler’s study or somewhere in a Lost World. Forge of Ice sabretooth tiger skin rug! Click for larger.
Rummaging through one of my boxes of random figures last week (as one does…) I came across one of the random Reaper fantasy figures I’d picked up on clearance over the years, the massive wolf-like Warg. No modern Bones resin-plastic lightweight here, this is a solid pewter beast nearly as big as a 28mm horse!
Reaper Warg in the middle, flanked by a 28mm Frostgrave witch on a 25mm base, and a 28mm Warlord mounted officer on 20mm by 40mm base to the right. Click for larger.
The base was assembled from three pennies and a bunch of Milliput, the warg got primed, and then it went into storage sometime in early 2014 (when the first paragraph above was written…) until just after New Years 2020, when I said to myself, as I was painting other demon dogs and werewolves, “Self, don’t you have a massive great pewter warg somewhere, bought many years ago?”, and after more rummaging in more boxes of miniatures than I’d like to admit to, the warg saw the painting bench for the first time in six years or so, and it was good.
The thing is even bigger than I remembered it being, over head high at the shoulder next to a similarly based 28mm figure and taller and bulkier than a warhorse. The base is roughly 20mm wide and 45mm long, and muzzle and tail stick out over both ends.
Big warg, demon dog, or some sort of hell-wolf! 28mm Frostgrave plastic witch on the left, mounted 17th C officer from Warlord on the right. Click for larger.
Looking forward to seeing this guy loping across the playing field, eating people and stealing souls, or perhaps the other way around! You never know with demonic canines…
Locally our COVID-19 situation is such that we’re allowed to expand our pandemic pods slightly starting a few weeks ago, so myself, my brother Corey, and our friend Sean decided to do the pod thing so we could get some gaming in. Turns out it takes a goddamn global pandemic to get me back to regular weekly games, so that’s a thing.
I own the Frostgrave rulebook in actual physical dead tree format, and we were all able to grab ebook/PDF editions while Osprey was doing their giveaway a month or so ago, and all three of us own enough random figures to put together usable Frostgrave bands, so we set off!
I’m currently using my 17th C English Civil War figures kitbashed with Frostgrave plastics to make a couple of wizard figures (last seen in bare plastic here), Corey is running Reaper mouslings, and Sean has GW Age of Sigmar ladies with big, big hammers. They’re so large we’ve decided they’re actually ogres or half-ogres.
We’re also ignoring the “frost” part of the Frostgrave setting, opting instead for overgrown forest stuff because that suits our existing terrain better. Hence “Forestgrave” instead of “Frostgrave”, then!
Sean on the left, Corey centre, the cat on the right. The circular mat is an attempt to make three person games less uneven. Click for larger.
Today was our second game, and Corey came out ahead on experience with his wizard/apprentice pair getting more spells successfully cast than Sean and I managed combined. We ran the Ruined Keep scenario, with the four teleporter discs around the table. There was no teleporter action at all for the first half of the game, and then suddenly everyone was doing the teleport trot. I think all three of our wizards wound up with the extra experience points for taking a teleporter ride, actually.
Start of the game. My chaps centre foreground, Sean’s ogre ladies top left, Corey’s mousling bravos top right. Click for larger.
We’ve decided that for next week’s game we are all going to roll up new wizard bands; now that we’ve had two games we’re all realizing there’s things we’d do differently for both warband composition and spell selection, and we want the chance to explore new setups especially among the huge list of spells available in Frostgrave.
Two of my musketeers skirt the toadstool fairy ring to shoot at ogre ladies in the background. Click for larger.
We’ve got some new scenery on the way, too, with Corey working on more ruin pieces and hopefully getting his cranky 3d printer functional again. I want to start building some ruined towers for the Silent Tower scenario, but need to clear at least some of the current painting and building stuff out of the way first!
We had our first game of Frostgrave last night, for which I used a few of my 17th C/ECW figures, because why not? As usual, I managed not to get a single photograph during the game.
I’ve decided to go with a “Greengrave/Forestgrave” theme instead of the default Frost- part of Frostgrave, so that we can keep using our current scenery rather than starting from scratch with winter stuff.
Four “teleportation discs” and a really gnarly looking fairy ring, today’s work. Click for larger.
One of the FG scenarios calls for a quartet of 2″ teleportation discs set up around the board, so I decided to whip those up today. The discs themselves are pink styrofoam, based on scraps of plastic card. Quick and easy scenery, a few hours from start to the current state shown here. They could well serve all sorts of purposes aside from just teleportation discs, and I’m sure they will.
Four pieces of fantasy scatter, closer up. Click for larger.
The other piece I created today started with the resin mushrooms from Bad Squiddo games I got a few weeks ago. I’ve been painting them up whenever I have leftover paint, got them finished today while waiting for the discs above to dry, and decided to put together a really, really gnarly fairy ring that, even more so than most others, you really do not want to enter. That’s a 28mm Frostgrave witch on a 25mm base behind the fairy ring; most of the mushrooms/toadstools are at least waist high on a human.
Any fairy that comes out of this particular fairy ring is probably not one of the good fairies. At all. Click for larger.
This might feature as some sort of marker in a game eventually, but for now it’s just some colourful scatter terrain to fill in a blank spot on the table and possibly worry players!
We enjoyed our single game of Frostgrave so far, and I’ll try to get a couple of photos tomorrow while we also try to get fewer rules wrong on our second outing!
This pair of guns were ordered from The Assault Group as part of the insanely slow to arrive order of June-September 2017. I finished the artillery crew at least a year ago and the guns have sat on one corner of my painting bench the whole time, cleaned up and dry-fit together but otherwise untouched.
The guns are nicely sculpted and cleanly cast, needing minimal cleanup. I spray primed and did most of the painting before assembling either gun, and on the basis of no research whatsoever decided to do the big culverin with a dark red frame and the smaller lighter falconette in green. Each gun has the body and tail as a single piece cast, the two wheels, and the barrel, and the wheels fit on much better than I’m used to with white metal parts, hardly any nudging of the axle pieces around to get everything square and solid.
Both Assault Group guns, some of the crew, the accessories still being painted in the foreground, and a Warlord Games mounted officer just because. Click for larger.
Nothing fancy about the painting, just a couple shades of Reaper paints, various washes (mostly GW), and a bit of edge highlighting that totally doesn’t show in either of these photos. Ah well.
The eventual plan (once they reopen…) is to get a pair of custom artillery bases lasercut in 2mm MDF by the excellent folks at Warbases that will have round holes for six crew figures to slot into and a flat area for whichever gun is in use, so that the crew aren’t weirdly raised over their gun because they’re based and it isn’t.
Slightly higher angle view of the guns. Click for larger.
I’m still not sure I’ll ever order anything from The Assault Group in the future, but if I do I’ll do it expecting a four to six month wait for my stuff, and rather like these guns, I’ll make sure it’s for figures or bits that I don’t need in any particular hurry or have an actual timetable built around! Given that I have no plans to do large scale 28mm battles in the English Civil War, 30 Years War, or any 17th C-theme gunpowder fantasy equivalent, a mixed pair of guns should be all I’ll need for now!
Forge of Ice is one of those one-person companies that makes all sorts of cool stuff, and after knowing about them for several years I finally got around to making a small order from them a few weeks ago. Most of the fascinating little one person companies are British, but Forge of Ice is in fact based in Fairbanks, Alaska.
Forge of Ice mostly does Lost World style stuff, small dinosaurs, oddball caveman-style accessories and stuff. I’m not doing much Lost World style pulp at the moment, but I have in the past and I’m certain I will in the future. Besides, I could always cross-pollinate my current weird 17th Century stuff with Lost World, couldn’t I? Hmmm…
Anyway, what did I get from the frozen depths of central Alaska? A pair of Snake Priestesses, a batch of five peacocks, a sabertooth tiger rug, and the centrepiece of this little collection, a resin Doom Serpent Idol.
My little Forge of Ice order – peacocks, priestesses, a rug (it’ll really tie a room together), a Doom Serpent Idol, and a cool sticker! Click for larger.
The serpent priestesses are elegantly slim 28mm figures, both slender women with large snakes wrapped around their arms and shoulders. I have no immediate plans for them, but they’re awesomely pulpy and clearly need some sort of group of underpriestesses, guards, and temple lackeys to order about in their sneaky attempts to do whatever it is snake priestesses from a Lost World plot to do.
The peacocks are some of the first figures Forge of Ice released, several years ago, and I’m thinking that as well as being just general fancy set dressing, with a couple of house rules they could be mobile alarm units in a Pulp Alley scenario where players are trying to sneak up on a fancy house and don’t dare disturb the peafowl least the damn things scream the place down and alert guards or something! (if you’ve never heard a peafowl scream, they have a glorious bloodcurdling horror movie shriek. It’s awful.) The smaller female peahens and the male peacock with his tail down are both single piece castings; the peacock in full display mode is two pieces. There will need to be a bit of filing and puttying to get the body of the peacock and his tail to match up nicely, but nothing outrageous.
The saber tooth rug was just too much fun to pass up, I suspect I’ll use it as weird decoration in someone’s study or something!
The gloriously Egyptian-esque Doom Serpent idol, just the thing to be guarded by a couple of serpent priestesses and their flunkies! Click for larger.
The Doom Serpent idol is a fairly serious chunk of fine grey resin, about 3″ tall and just over 2″ wide at the shoulders. I’m really looking forward to painting this one up, I’m thinking a sort of blond/tan sandstone look like we see in Egyptian statues, with some coloured painted bits here and there, will look great.
Hopefully one of these days Alex gets around to getting Forge of Ice an actual website, but in the meantime go have a look at his Lead Adventure thread (you don’t need a LAF account to see it) and ping him by email, by the message service at LAF, or via Facebook Messenger to get your cool weird Lost World loot from the distant north!
Ordered a few things from the excellent and varied ranges of Bad Squiddo Games back in March; things took longer to get from the UK to here than I’m used to, almost like some major world event is disrupting trans-Atlantic flights or something. However, everything was dispatched from the UK in good time and I am certainly not going to blame Anne of Bad Squiddo or the various postal services involved for a lack of air mail capacity…
I got a fairly mixed bag of stuff. A few ladies that will probably show up mostly as players or civilians in my English Civil War/Weird ECW games, a fine herd of pigs and some farm scenery, a bunch of cats, and some small scenery to add detail here and there, including a whole lot of mushrooms and toadstools for suitably creepy weird fantasy/horror forest bits.
Most of the Bad Squiddo haul all laid out. Clockwise from lower left: mushrooms/toadstools, candles, several female characters, cats, fish seller w/ cats, skoggskattar, and finally in front centre a batch of food. Click for larger.
Skoggskattar – giant Scandinavian cats. Compare to the 28mm Warlord guy jogging past them on the right right there. Click for larger.
Everything is really cleanly cast and beautifully sculpted. The scenics are mostly by the very talented Ristul and in an interesting slightly flexible grey resin; the white metal sculpts are by a variety of sculptors and all really well done.
Not pictured above is the pigs, my favourite single part of this purchase. I indulged in the Pigtopia bundle deal which got me ten pigs and six bits of pigsty/farm scenery. I’ve already painted the pigs up, basing them in small groups on 40mm bases.
Bad Squiddo pigs! Ten pigs, six pieces of pig-related scenery. Click for larger.
I painted the pigs up to vaguely resemble one of the oldest heritage breeds of pig in the UK, a black-and-white breed that I now can’t find or remember the name of. Anyway, they painted up nicely and I look forward to watching them chase players around the table or be part of someone’s provisions on the hoof in a scenario.
Pigs all painted up, all on 40mm bases. Just a bit of greenery to add and they’re all done. Click for larger.
