Posts, articles and links mostly concerning the painting of miniatures. Lead Painters League posts, links to resources and inspiration elsewhere, and such.
Up next was the “GATE” lettering and giant numbers for the three numbered gates.
Mid-project roundup. Rust basecoat on the big numbers, front centre; GATE lettering primed on the right, and the gate towers all lined up behind and overhead. Click for larger.
I cut the giant numbers from sheet styrene and mounted them on strips of scrap styrene. The GATE lettering was 3d printed as separate letters and then mounted on very thin square section styrene strip. To make that easy I taped long pieces of the styrene strip down to my cutting mat, glued the letters down, then once the glue had cured cut each word out.
Everything got spray primed grey and then basecoated the same blotchy rust I’d used on the overhead gantry and elsewhere. I stippled and drybrushed everything with a couple of different shades of off-white (Reaper Linen White and Leather White, primarily) before a final drybrush of Reaper Pure White.
The GATE signs and numbers all mounted and final weathering begun. Click for larger.
After that it was back to the weathering, primarily drybrushing with a big soft makeup brush. I only just picked one of these up, a super cheap dollar store special, and it really is the bomb for drybrushing! I used a fairly random selection of browns, reds, tans, and off-whites for this, going back and forth over all the towers and the gantry as well.
Back view of the six gate towers, with speaker cabinets and loudspeakers mounted. Click for larger.
While adding the lettering I had finally primed, painted, and installed the roof on the announcer/race official cab on the lefthand start gate tower. I thought about installing mesh on the windows but decided to leave them open for now; I might go back in and add some additional protection for the folks who wave the chequered flags but the current form will do for now!
Roof installed on the announcer/official cab. It had to be cut to fit around the fairly random structure of the tower itself. Click for larger.
Final touches and some finished shots soon as this project finally wraps up and might actually hit the table sometime soon!
When we last saw our gates they were basecoated but stalled due to missing 3d printed parts. Those arrived, thanks to my brother’s 3d printer, and I was able to move on with the project.
I didn’t want to start the overhead gantry on the Start/Finish gate until I had the 3d printed “Esquimalt Thunderdome” sign in hand, but once I had that the basic construction went together quickly.
The three openwork girders have been in my stash for decades and the packaging is long gone, but they’re from Plastruct – possibly these ones, which seem to be about the right size. You can find all the similar openwork web girders from Plastruct by searching their site for “web”.
The girders are only six inches long, so I knew I’d need to extend the gantry with other materials as the Gaslands rules call for gates the same width as a Long Straight movement template, which is roughly 7 inches long, and Corey’s Thunderdome racetrack dirt track is roughly 8 inches wide. Fully finished, this gantry is almost 10 inches long, and slots into the roof structure of the two vertical gate towers to hold everything together.
The start of the overhead gantry. I later pulled off the plastic mesh as it was getting in the way of construction and painting, and replaced it much later in the process. Click for larger.
The rest of the gantry was a random scatter of styrene shapes from the stash – there’s some flat C-channel, different T- and H-girder bits, and lots of square or rectangular cross section stuff. It had to both look structurally sound and actually have a certain amount of structural integrity, but the beauty of post-apoc engineering is that it still looks great if you bodge extra bits on to fix earlier problems!
in progress but before priming. You can see here how the gantry’s beams slot into the tops of the two gate towers. Click for larger.
After grey primer I covered the whole thing in a blotchy rust coat using a couple of different shades of browns, reds, and oranges.
Rust coated. Click for larger.
After the rust coat I did a blotchy coat of white, partly drybrushed and partly stippled into place. This came out far better than I’d hoped, and really looks like white paint that’s flaking off as the metal under it rusts and weathers.
Stippled and drybrushed white, and first coats of blue on the sign. Painting of the actual gantry is basically done at this point; the sign got a bunch more weathering and highlighting and touchups. Click for larger.
The speaker cabinets and loudspeaker horns were 3d printed from STLs on Thingiverse, both from a very nice collection of Gaslands parts. The speaker cabinets were printed in two different sizes, which added some visual interest.
Speaker cabinets and loudspeaker horns in place and weathering started. Click for larger.
The speakers got painted a blotchy off-black (Reaper Pure Black with a dot of one of their greys mixed in) and the loudspeakers got one of the many tan off-whites in my collection, I can’t remember which one.
The clutter of speakers and loudspeakers really makes this piece pop, it’s exactly the visual clutter I’d pictured in my head when first thinking these designs up!
I’d like to add some light fixtures, but it seems nobody makes 20mm 3d printable floodlight fixtures, at least not that I can find, and I’d want enough of them that scratchbuilding isn’t really an option unless I can come up with a really simple design…
The back of the gate, with mesh back on the walkway and all the 3d printed stuff getting weathered.
Next up, painting and installing the big “GATE” signs and numbers on the rest of the gates, and loads more weathering. So much weathering…
A scattering of links for our first Links of Interest of 2021!
More possible sources of small scale scenery are always welcome, and over on Wargaming3d Wozname has started a new line of 3d printable STL files for 1/1200 scenery, starting with a few entire islands and some castles. Really neat to see people doing entire pieces in these tiny scales that would be basically impossible to do in any larger scale!
On the small scale naval gaming theme, the Society of Twentieth Century Wargamers has a couple of articles on small boat actions in the Mediterranean in WW2, with one article on mostly focusing on British vs Axis and the second spotlighting American PT boats. They’re framed around Cruel Seas but trivially easy to adapt to other rule sets.
Reaper Minis hosted a Virtual Reaper Con last weekend, and while I’d initially signed up for four classes on various painting topics, the world conspired to only allow me to attend one class, a fantastic discussion of “Additives, Mediums, and Texture Pastes – Oh My!” by Rhonda “Wren” Bender, talking about matt and gloss mediums, flow aids, drying extenders, glaze medium, texture pastes, and various other things as they apply to miniature painting. The class handout is available at the link above, the session was recorded and will eventually show up on Reaper’s YouTube channel, and Rhonda has a great website of her own over at Bird With A Brush that’s well worth checking out.
Incidentally, the anchor chain stock photo being used as a header for these Links of Interest posts is by CastleLight from Pixabay.
Finished up my first three cars for Gaslands over the weekend, the two Barracudas and an Impala last seen in grey primer a little while ago.
Basecoat on all three cars; the black stripe on Vlad was done as part of the basecoat with glaze medium. Click for larger.
Car One: Vlad the Impala
The big red and black car is an Impala, so naturally it has to be called Vlad in the long tradition of ancient dumb car jokes. The bulldozer blade ram plate, exhaust pipes, ring mount gunner, and rear slab spoiler are all off the North Star accessories sprue; the bar armour on the windows is thin styrene plastic strip. I might yet freehand the car’s name on the top of the spoiler, but it’ll thunder around the track quite handsomely without it for now.
Vlad the Impala, right hand side.
Vlad, left hand (drivers) side.
Two views of Vlad the Impala.
Car Two: the blue Barracuda
This one seems to have accidentally turned into a Spaff Maureen landsplatter or whatever they’re called, never having played any 40K myself. It’ll be nice and clear which direction to point toward the finish line, anyway! Sheet armour over the windows is sheet styrene scrap; the air scoop, gun, and minedropper are North Star accessories.
Posed on the ramp so we can see the top nicely.
Side view on the ramp.
The blue Barracuda.
Car Three: The Purple People Eater (Barracuda)
The second Barracuda is wrapped up in some extra bar armour with a pair of machine guns bolted to the hood. Guns again from North Star, bar armour bits from scrap styrene. Over the purple paint it has neon green skulls on the trunk and both doors, with some flames alongside the gun on the hood.
Rear view, showing the trunk skull and rear window armour nicely.
Front view, with flames, guns, and windscreen bar armour.
A Few Extra Shots
Just a few extra beauty shots for fun!
Both Barracudas heading up the jump. You can see the passenger door skull on the side of the Purple People Eater. Click for larger.Tight starting grid, or parked up waiting for the mayhem to start! Click for larger.
My next project is going to be a set of gates for Gaslands race events; I’ve got a big stash of random plastic tubing, girders, and such that’ll make three or four gates to lay out race courses.
We’ve had a couple more Gaslands-by-webcam sessions since Corey wrote up his how-to and that’s inspired me to finally get the first few cars built up properly.
I’d primed and painted these cars months ago and they probably even appear in a few of our game photos, but I’d rushed the painting so the primer was scratching off far too easily, and I really hadn’t done much conversion.
I dropped the metal car bodies back in Simple Green to reset them to bare metal, then set about properly converting them into post-apoc Gaslands armed cars! Some time ago we’d done a group order to North Star for a bunch of their Instruments of Carnage plastic accessory sprues and those plus bits of plasticard from my parts box has gotten me three armed, up-armoured cars, all Gaslands Refuelled legal designs.
Vlad the Impala in progress. The huge absurd exhaust stacks, bulldozer blade ram, pintle mount gunner, and sheet metal spoiler are all from the North Star accessories. Click for larger.
The first and largest of the three cars is Vlad the Impala, with a turreted MG or HMG, ram plate salvaged from a bulldozer blade, huge exhaust stacks coming directly off the engine block, and “spoiler” on the back hacked from a piece of sheet metal. The windows also got barred off with plastic strips.
The school of Barracudas. Dual MG/HMG on the left and in-progress bar armour over the windows; the right hand ‘Cuda has an air scoop, single front HMG, a rear dropped weapon (not yet fitted), and sheet metal over the front and rear windows.
The two Barracudas are slightly smaller. One of them got an air scoop on the hood, a single HMG mounted alongside, sheet metal on the windows, and a dropped weapon (usually mines) off the back. Barracuda 2 got metal bar armour over the windows and reinforcing the front and back of the car, and a pair of MGs or HMGs on the hood.
Vlad the Impala all primed and ready for paint, with the bar armour over the front window nicely visible. I scarred up the ram plate with files, an Xacto knife, and a tiny drillbit a little bit, because it’s such a prominent feature of the car. The exhaust stacks stick up so high as to get in the way of the gun mount, but Rule of Cool prevails so I’m sure the gunner can work around that little detail. Click for larger.All three cars all ranked up ready for painting. Click for larger.
I’m pretty sure that one reason I had trouble getting paint to stick to the metal toy car bodies the first time I tried painting these cars was because I rushed off to paint before the primer coat had properly cured, so I’m going to put this trio aside for a couple of days to give the primer a chance to really properly dry and cure.
Rear quarter view of all three cars. Very pleased with all three of them, and looking forward to getting paint on them soon! Click for larger.
I haven’t actually finalized a paint scheme for any of them, although I suspect Vlad the Impala will wind up red and black, with one of the Barracudas mostly purple and the other blue, just because. There are driver figures on the North Star sprues, but with all the window armour none of the driver seats are particularly visible, so I think I’ll save them for other projects with more visible crew positions.
Given that our current COVID restrictions are running until at least mid-February at this point, I am probably going to finish all three of these and then drop them off at Corey’s place, along with the jumps and other terrain I finished late last year so they can appear in our webcam games as lockdown drags on!
I’ve talked up Rain City Hobbies on this blog before, but only for their very nice grass and flower tufts. They also do a huge range of resin bases, but because I rarely use elaborate complex bases they’ve not interested me much.
I do own a few of their resin bases, however, picked up from the “production seconds by weight” bin sold by Rain City at gaming conventions. (remember gaming conventions from the Before Times? I miss them…)
Needing a distraction from current events I decided to paint up the biggest of these, an elaborate ruined temple base nearly the size of a CD, their Huge Ruined Sanctuary insert. 120mm (~4 and a quarter inches, roughly) across, the production second one I have has nearly perfect molding of all the details, but it warped before the resin had fully cured so won’t lie flat.
The ruined sanctuary base all painted up. Click for larger.
I tried out a bunch of different stone painting techniques on this base and I’m really pleased with how it turned out. The three big chunks of shattered statue were based in light tan, then progressively highlighted with whiter and whiter paints well diluted with glaze medium, which really got a translucent polished stone effect going.
The green arc and big green fragment were basecoated fairly dark green, then given marble-like veins with brighter greens, again well mixed with glaze medium. They got a good coat of gloss varnish, and then some highlighting with almost pure white.
The flagstones got basecoated with four or five off-white/tan shades, washed with GW Sepia and Earthshade washes, then highlighted with light tan and off-white. The tree roots are various shades of reddish brown.
The big base from the other side. Click for larger.
Because of the warp across the width, I’ll probably base this onto a larger piece of thin plastic, then use putty and then foliage to merge the lifted corners back into the base, making this look like a fragment that has been largely swallowed by forest or jungle.
I’ve also got a few more random bases I might finish up, and those three tan pieces to the right in both photos above are the Large Broken Statuary Base Accessories that I will be using either together with the big base or on their own as scenery elements. More on them in some future post when I get them finished.
Stay safe, stay home, try to get something creative done, mask up when required out in public, and better days (actual gaming conventions!) shall come again.
Speaking of YouTube, Dr Alexander Clarke has an interesting channel with WW2 and interwar naval stuff, mostly British. Similarly, Drachinifel does mostly WW2 naval history videos as well, more American navy but some others.
Boom & Zoom Graphics have a set of really approachable, humourous, but (far as I can tell) complete introductions to WW2 aircraft markings, painting, and camo, with entries for each of the major combatants. Superb reference for WW2 air if that’s largely a new field to you as it is to me!
I’ve finished painting the last buildings of my first Brigade Models Small Scale Scenics order, before I start in on painting the buildings and scenic bits I got in my second Brigade order. This batch has the British town, village, and suburban buildings I didn’t use previously, a bunch of industrial buildings, and a couple of lighthouses.
The cutting mat in all of these photos is a one inch/half inch grid, for scale. The largest of these buildings is less than two inches long, and the smokestacks are all between an inch and an inch and a quarter tall.
In progress industrial buildings, in various shades of grubby brick. Click for larger.Walled farmyards and various houses and such behind. Click for larger.Everything all finished and off the painting sticks. Industrial buildings over on the left, two churches and a variety of detached houses centre, various town/village buildings on the right. Farms in the background. Click for larger.The industrial buildings, churches, and a variety of houses. Click for larger.Town and village buildings, and some more large detached houses on the right. Click for larger.The farmyards, still with some work to do on the actual yards but the buildings complete at least. Click for larger.Lighthouses and Martello towers. Click for larger.A streetscape of sorts, most of the village/town buildings pushed together roughly with the larger church behind. Keep in mind most of these buildings are about 1/4 inch wide! Click for larger.
Now that these are all done they’re getting varnished and then put back into storage for now, so that I can move on and finish some more partially finished projects before I come back to building more coastal modules and starting on the buildings from my second Brigade order.
When I did my first WW2 coastal order to Last Square back in November 2019, well over six months ago now, I added a pack of British Beaufighter/Beaufort and a pack of German Ju88 for the heck of it, chosen because both types of aircraft show up in the maritime strike role for most of the war with various loadouts.
I got them, looked at them, was dumbstruck by the insanely minute size of the things, and put them aside to paint the boats up instead. Having just finished (most of) the second order of Last Square coastal naval boats and being in a get-stuff-finished mood, I decided to have another look at the tiny tiny planes and figure out how to mount and paint them.
I recalled reading about using plastic broom bristles for masts and antenna previously, so I decided to test this out for creating flying stands suitable for tiny planes. I used the same 40mmx20mm thin acrylic bases I’m using for most of my boats, because I’ve got them, and I happened to have a micro-drill-bit in my tool stash almost perfectly the same size as the bristles I harvested off our household broom.
RAF Bristol Beauforts/Beaufighters, two mounted and one left loose. Click for larger.
I kept the flying heights fairly short, about one inch maximum, which means these planes are all coming in at wavetop height, pretty much, which seems to make sense when attacking small coastal vessels and is way, way easier to store than taller possibly more realistic height stands!
Two Beaufighters and two Ju88 mostly done, including recognizable national insignia on these tiny, tiny planes. Click for larger.Extreme closeup of the unmounted Beaufighter and Ju88. I’m pleased with the look of the canopies, especially on the German Ju88 with their big “greenhouse” canopies covering most of the front end. Click for larger.
Painting Notes
All my current paints are from the Reaper Master Paints series. All six planes got a white primer, and then for the RAF I used Muddy Brown and Military Green for the topside camo; the underside is Heather Blue mixed with Rainy Grey which seems like a good match for the RAF “sky blue” grey-blue underside paint.
The Germans were a mix of Rainy Grey and Muddy Olive 1:1 for the all-over base coat, with two of the Ju88s getting slightly darker grey-green camo added with some additional Stone Grey added to the Rainy Grey/Muddy Olive mix.
I adding some highlighting along edges mostly by mixing a bit of Rainy Grey into the relevant base colour, and the Germans got some yellow recognition patches with Marigold Yellow. I also used some Games Workshop Nuln Oil (black) and Agrax Earthshade (brown) washes, especially along the roots of the wings.
The German iron crosses are Walnut Brown, a lovely almost-black that I use all the time instead of actual Pure Black.
The RAF roundels are Marigold Yellow, Sapphire Blue, Pure White, and Carnage Red.
Windows and cockpit canopies were picked out with Ghost White, a blue-tinted off-white.
For scale, I made sure to take this photo with my thumb “in the way”. That’s a standard CD I’m using to hold the planes, just for additional scale. These things are seriously tiny. Click for larger.Side views, RAF Beauforts/Beaufighters on the left and Luftwaffe Ju88 on the right. Click for larger.Tail end view, Beaufort/Beaufighter left, Ju88 to the right. Click for larger.Forward view, same arrangement as previous. Click for larger.
Aircraft don’t actually play a huge role in most of the engagements coastal naval vessels find themselves involved in, so I don’t think I’ll be adding to my collection of tiny aircraft anytime particularly soon, but these turned out to be fun to paint and they ended up way better looking than I was thinking they would, given the diminutive size of the things!
Latest batch of World War Two coastal naval vessels in 1/1200 scale is done and based. As with the previous vessels, these are all Figurehead from Last Square in the States. I’m especially pleased with the two German patrol trawlers (Vorpostenboote) with their dazzle/disruption camo scheme.
First of two Vorpostenboot. Click for larger.Second Vorpostenboot. The two models are actually different, which is cool when representing these notably heterogeneous craft (almost all requisitioned trawlers pressed into service as escorts) on the table. Click for larger.
I also did up a few more Royal Navy Coastal Command craft, four Fairmile B Motor Launches and four 70′ British Power Boat (BPB) Motor Gun Boats. The BPBs are really tiny at 1/1200 scale, under 20mm long!
Four BPB Motor Gun Boats in the foreground and four Fairmile B Motor Launches in the background, all on 40mm long acrylic bases. Click for larger.
And the reason it’s been quiet here on the blog for the last couple of weeks is that I’ve been completely pulling my hobby/painting area apart and have finally mostly put it together again, all with the aim of installing a big Ikea shelving unit in one corner, a Kallax 57′ x 57′ monster.
The partially-rebuilt painting/hobby/game storage area! Click, as always, for larger.
The cubicles of the Kallax will fit a banker’s box (there’s a couple in there already) which is already my standard method of storing and transporting scenery. I’m still planning a massive sort of my scenery stockpile, which will (to be honest) probably take another couple of months in bits and pieces. There’s stuff in the stash that hasn’t hit the table in years and year because it’s buried under other things or just straight up been misplaced and I don’t actually know where it is!
