Category Archives: Historicals

Historical and quasi-historical gaming of various sorts. English Civil War and Thirty Years War, the Great War (World War One), the Russian Civil War and other interwar conflicts, and whatever else we wander into!

English Civil War/Thirty Years War, Historicals, Painting

The Workbench This Week, 12 June 2017

2 Comments

Much chaos in my non-gaming life, so time and brainpower to actually paint is kind of hard to come by, but this weekend I sat down and organized my pike & shot foot figures for Pikeman’s Lament and other English Civil War or Thirty Year’s War gaming.

I now have exactly 60 figures assembled, based, and in progress for this project; I know it’s exactly 60 because the 4Ground 25mm bases I’m using come in batches of 60 and I just finished the first batch of two that I’ve bought!

All the pike & shot foot so far. See text for details, and click for larger.

Starting from the far left, there’s a unit of musketeers in blue uniforms, then a pike unit in blue (on the close-order base from Warbases). To the right off the back edge of the cutting mat is another dozen musketeers, this time in green. In front of them is six foot characters/officers/leaders and one mounted officer, and on the skirmish base to the right is the first six forlorn hope firelock musketeers. Finally in the front right corner is another dozen pikemen, in green uniforms. All the figures are from the Warlord Games Pike & Shotte range, all plastic from their infantry regiment box. This is one full infantry regiment box plus a couple of extra sprues picked up separately, except for the firelock/forlorn hope figures who are the first of the Forlorn Hope/Firelock Storming Party box I’ve assembled.

The blue pikes are closest to being done, and a few of the green musketeers got finished as part of LPL11 recently. Most of the bare grey plastic figures were assembled just this weekend to fill out various units and add some more leader/officer/character figures to fill out some units.

Unassembled, I’ve got another 14 musketeers, enough for a second full unit of “blue” musketeers. That will give me a “full” pike and shot unit of 2:1 shot:pike ratio, which will look good on the table! There’s also another 12 firelock musketeers, and a dozen cuirassier heavy cavalry. Finally I’ve got another dozen regular cavalry fully assembled but not shown above; six of them are fully painted and the other six have been almost finished for… about four years now, or maybe longer…

Four new foot characters, and some finished ones behind. Click for larger.

The four new officer/character figures are made with arms from the Warlord plastic pike & shot infantry command sprue, and a mix of pikeman bodies and bodies from the command sprue. The two on the left are pike bodies; the two on the right are command sprue bodies. The two completely finished and based figures in back alongside the mounted officer are also made the same way, with two spare pike bodies. I have more command or character type figures than I’m ever likely to need for Pikeman’s Lament, but they’re fun to assemble and there’s lots of single-figure small skirmish games out there like Pulp Alley that I could see tweaking for an ECW setting!

As soon as I saw how the figure on the far right came together I thought about cutting the head of the halberd off and turning it into a magic-user’s staff of some sort! Hmmm, mix and match the fantasy Dragon Rampant with Pikeman’s Lament? Dragon’s Lament? Pikeman Rampant? The two games use the same basic core rules, so it might be possible, and gunpowder/Renaissance fantasy (vs more standard medieval fantasy) has always been an interest of mine!

I haven’t actually sat down with the Pikeman’s Lament rules to put together some companies, but the figures assembled and based here are enough for a full size 24pt force with some different build options. I’m going to try to get one or two of the almost-finished units actually pushed through to completion this week, and hopefully get a PL game of some sort in next Sunday, but we shall see…

English Civil War/Thirty Years War, Historicals, Pulp, Reviews, Terrain

Review: Warbases MDF Vehicles

Leave a comment

Warbases started doing vehicles in lasercut MDF and cardboard (greyboard) a few years ago and I was intrigued right away; a lot of 28mm vehicles are fairly expensive or (especially for World War One, Russian Civil War, or other early 20th C gaming) simply don’t exist.

It took me a while to get around to ordering any of the vehicles, but I now have a Pierce Arrow truck and an Albion truck that I’ve built, and I’m pleased to say these are really nice kits, great value for their cost, and quite easy to build!

The Peasant Cart

I also picked up Warbases’ Peasant Cart 2, which is part of their Carts & Wagons line, listed separately from the Vehicles line. This is a straightforward little model, about 20 pieces including the wheels, and produces a nice solid piece of wargaming scenery. It’s called a cart, but it is a full four wheel wagon.

Assembly and painting didn’t take much time at all, maybe half an hour. I used a random grubby wash of green-grey over the whole wagon, added a bit of pale grey for the insides of the wagon, then did a bit of edge highlighting with a grey-white mix just to pop some of the edges a bit. I’ll probably glue some straw (cut from manila cord) down to the inside of the wagon just for a bit more easy detailing.

Assembled and painted wagon, resting on top of a paint jar. Click for larger.

The wagon is big enough that two or three figures on 20mm bases could fit in the bed of it, although it’s too narrow for 25mm or larger bases to fit flat.

The Trucks

The Pierce Arrow is a relatively small truck, with room for two or three figures in the truck bed. The Albion is quite a bit larger, with room for 6 figures on 20mm bases or 3-4 figures on 25mm bases in the bed.

Albion truck under construction in the foreground, Pierce Arrow in the background. The figure is a 28mm Pulp Figures mechanic on a 20mm base. Click for larger.

Each truck comes as a couple of small sheets of MDF and an even smaller (business-card sized, roughly) sheet of greyboard card, with roughly 30 or so parts per vehicle. The instructions are photo-illustrated PDFs on the Warbases website, which does mean you can check them out before purchase. It sometimes takes a bit of peering at some of the photos to figure out which part is being fitted where, and as always I highly, highly recommend carefully dryfitting everything before you start adding glue!

One thing I noticed and appreciated about both trucks and the wagon is that any part that isn’t unique is actually identical to any corresponding part – the sides of the truck beds are identical and interchangeable, for example. Most parts aren’t labelled or numbered, but this nice design touch makes it hard to screw up the build process. Warbases has also put on-sprue/on-sheet photos of the parts of all three of these kits on their website, which helps sometimes with keeping track of parts.

The Pierce Arrow truck took me maybe an hour to assemble and paint to the point you can see in these photos; it’s got a bit of detail painting and cleanup left to do, and maybe some more weathering, so these are fast kits to assemble and get onto the table. I stopped assembling the Albion at the point you see in these photos so that I could paint the undercarriage before adding the wheels and fenders, as the Pierce got a bit cramped to paint with the wheels in place and the Albion has fenders on all four wheels, not just the front. I’ve also skipped putting the cab roof on the Albion for now to make painting the inside of the cab less painful.

Top view of both trucks with figures on 20mm bases in both. Six fit easily in the Albion (left) while three only just fit in the Pierce Arrow (right) with the third one overlapping. Figures all by Bob Murch/Pulp Figures. Click for larger.

The Pierce Arrow has been basecoated dark green with a black roof; I’ll do a round of highlighting (mostly of the edges) and there’s some detail areas like the wheels, headlight, and front grille left to paint. I haven’t decided what colour to do the bigger Albion; possibly dark grey or tan. Both colour schemes will do for either military or civilian vehicles of the era, especially in the chaos of the Russian Civil War!

The fenders, incidentally, are the only really fiddly bit of these kits. They’re lasercut card (greyboard) that you have to bend gently and then glue to an MDF inside piece to get them to hold the needed curve. Neither fender on the Pierce Arrow is quite right, although both are acceptable given the battering such fenders would take on the real vehicles! The instructions from Warbases say to bend the fenders over a pen or the handle of an Xacto, but doing this caused the greyboard to crease for me. I had better luck gently pressing the pieces against the pad of my thumb with another finger and gently flexing the card into a sort of curve that way.

That quibble aside, these are great kits and I’m sure I’ll get more eventually. They’re very sturdy once assembled, well designed for easy assembly, and it’s nice to have such an inexpensive source of vehicles for Early 20th C gaming!

English Civil War/Thirty Years War, Historicals, Terrain, Tutorials

Stone Outbuilding Finished

1 Comment

Glued down the towel thatching, slapped a coat of paint over the small stone building, added the door, and declared it done!

The towel got cut into a rough rectangle, big enough to hang an inch or so over the edges of the cardboard roof on all sides. I used a hot glue gun to glue the towel over the cardboard roof, including wrapping it around the edges and underside of the sides of the roof. This gave the roof the nice thick edge you see on a lot of thatch roofs. To fit the roof around the curve at the rear of the building I cut up to the peak of the curved part and layered the towel over itself further down, trimming a bit away so the overlap wasn’t too large.

Adding black paint and glue to the roof. Click for larger.

The first layer of painting was actually a mix of paint and white glue, generously applied with a fairly large brush, with a bit of water to help move the paint around. Towel soaks liquid up like, well, towel, so expect to use more paint and more glue than you first thing you’ll need! After this mix has dried overnight it’s really solid and gamer-proof. One of the reasons I usually use a tan or off-white towel for thatch, even though I always paint over it, is that any bits of towel that don’t get painted still look reasonable, which wouldn’t be the case if I used a colourful towel &mdhas; thatch ain’t usually blue or red…

Basecoat on the thatch, with the farmhouse in the background and a 28mm Warlord pikeman for scale. Click for larger.

After the black paint has dried overnight I drybrushed various shades of brown and tan over the thatch, ending with a fairly bright yellow-tan colour mixed with a bit of white, applied mostly along the ridgeline and edges of the roof, just to make them pop a little. As with the base coat, don’t bother using a small brush for this, I used a 3/4″ wide cheap house painting brush for all of this work!

The stonework had also been based black. I put a few blotches of green and brown down here and there, and then drybrushed a dark grey, a pale grey, and finally a mix of pale grey and white over the stones.

I didn’t get a photo of the door, but it was done on a rectangle of light card with narrow pieces of scrap wood from coffee stir sticks, glued down with hot glue, then hit with a heavy dark wash (mostly GW Nuln Oil) so it looked like heavily weathered wood.

Painting all done, just the door left to install. Click for larger.

Stonework from styrofoam is a lot of fun and fast to do; I might do a few more stone cottages or something eventually. Maybe a ruined abbey or something suitable for pulp/English Civil War crossover gaming? We shall see!

English Civil War/Thirty Years War, Historicals, Inspiration, Links, Terrain

Links of Interest, 16 May 2017

Leave a comment

A semi-random collection of links that have caught my eye recently!

Swamp grass from cheap paintbrushes via Rob Hawkin’s awesome blog. Hmm, I just picked up a 5-pack of Home Depot paintbrushes that look exactly like the one he uses in his tutorial, and I’m planning some stream/swamp sections! Lots of other good stuff on Mr. Hawkin’s blog, it’s well worth rummaging through his archive.

The crowded English Civil War – Royalist & Parliamentary garrisons in a 14 mile by 14 mile area of the West Midlands! I looked a few of these locations up on Google Maps – it’s mostly the suburban/semi-urban sprawl and absorbed villages on the edges of Birmingham these days. One thing that fascinates me about the ECW is just how damn small the UK is. A lot of the historical counties are 50-75 km each way or less, and for the small skirmishing squabbles of the ECW competing garrisons only a few miles apart wouldn’t be uncommon.

Tiny Furniture is a fairly new company with some neat science fiction furniture and detailing bits for your tabletop terrain projects. They’re running a Kickstarter as I write this for some retro-apocalypse (Fallout-style) furniture that looks pretty cool.

Finally, some rather cool space travel posters in a deco style for anyone like me who enjoys that style.

English Civil War/Thirty Years War, Historicals, Terrain

Stone Outbuilding/Hovel

Leave a comment

With the farmhouse and dovecote progressing well, I wanted to move on to a few smaller buildings to the mix.

This little stone outbuilding is the first of those. It’s a few random scrap pieces of pink insulation styrofoam, hot glue, and a chunk of corrugated cardboard so far. Footprint is about 2″ wide by 3″ long, and it’s about 2.5″ tall or so.

Stone outbuilding from scrap styrofoam insulation. The roof will get towel over it for thatch. Click for larger.

The four wall pieces were glued together with hot glue and the curve across the back cut after everything was assembled. I didn’t get a photo before I put the cardboard roof on, but there’s another couple of bits of scrap styrofoam under it to reinforce the roof.

Underside of the stone outbuilding. Four bits of styrofoam for the walls, with the curve of the back wall cut freehand after everything was assembled. Click for larger.

The gap in the front wall will get a door from scrap cardstock after the stonework is all painted up.

This one might be finished tonight, if I get time to glue the towel thatch down and slap a bit of paint around. It’s nice to have some quick little projects sometimes!

English Civil War/Thirty Years War, Historicals, Terrain

Half-Timber Farmhouse, Part One

Leave a comment

After getting the dovecote constructed (although not yet painted) I decided the next building would be a bit more substantial, and that a farmhouse would be the obvious counterpart to the dovecote.

It’s not quite a manor house, except maybe in some rather backwoods shire, but it’s a substantial two storey building with a big chimney rambling up one end. The main structure is all 1/16th matt board, the stonework is pink styrofoam insulation, and the timbering is thin wooden coffee stir sticks, mostly split lengthwise into thinner pieces.

The dimensions, roughly, are 5″ long, 3″ wide, and about 5″ tall to the top of the chimney, which is about where the roof peak will fall too once that’s done. The walls are 40mm high; the total base is about 7″ long and 5″ wide or so.

The earliest construction photo I remembered to take. Walls all up, foam stonework in progress, started the half-timbering on the back wall and one long wall. Second floor off to the left. Click for larger.

The other end, early in construction. Stonework in place and half-timbering just begun on the first floor. Click for larger.

For the cobblestone patches outside each door and the bricks up the chimney, I used two different old paintbrushes that I yanked the worn-out bristles from and then re-shaped the metal ferrule with a pair of needle nose pliers and a small file. The smallest brush became the brick press tool, and a slightly larger round one became the cobblestone tool. There’s also a larger rectangular one that doesn’t appear on this project but will at some point in the near future. I’ll get a photo of the press tools for a future post, they’re a great easy way to do bricks, cobbles, and other semi-regular or regular masonry patterns.

Upper floor in place; it’s basically a three-sided tray held in place by the horizontal half-timbering along the sides. Click for larger.

The second floor is three-sided to make building the big chimney down the back wall easier, rather than splitting the chimney into two or three pieces. The second floor is held in place by the half-timbering horizontal beams along the two long sides of the house, and the beams overlap at the back corners so the join between the floors and walls is nearly invisible when the house is all assembled.

Close up of the end wall, with brick patterning all done on the chimney. The pink foam has been coated in GW Liquid Greenstuff for strength and texture. Click for larger.

Wider view of the chimney end of the farmhouse, with 28mm Warlord pikeman on a 25mm base for scale. Click for larger.

The top cap of the chimney is a scrap of matt board and two little segments of styrene tube, all coated in more GW Liquid Greenstuff for texture.

Timbering all complete and roof structure started. Click for larger.

The roof will be thatch, once I get around to picking up another cheap handtowel to chop up for thatching. The understructure is a mix of 1/16th matt board and lighter card, and will all be buried under towel in due course.

In the background of the last photo you can see the current state of the dovecote, all black primered with yet more GW Liquid Greenstuff to add texture to the wattle & daub panels between the timbering.

I’ll probably paint both buildings together, now that they’re both at the primered stage. More on that soon!

English Civil War/Thirty Years War, Historicals, Terrain

Half-Timber Dovecote, Part Two

Leave a comment

When we last saw the dovecote, the halftimber detailing on the walls was done, the roof was just started, and it lacked paint.

Here’s the current state of the beast!

Waiting for paint! Click for larger, as usual.

The roof got cardboard tiles to look like slate on both the main roof and the top of the tower. The capping along the ridges on the main roof is strips of light card, while for the tower roof I used greenstuff putty for the ridge caps and the little finial decoration right at the peak.

I also used a bit of greenstuff to add a ring handle to the door, and some details to the hinges.

The whole thing has been primed black, and then the wall panels between the timbers got a coat of GW Liquid Greenstuff to add some extra texture to those areas.

I’ve also started work on a large farmhouse, two stories with a thatch roof planned for it. More photos of that soon, it’s coming along nicely and I suspect I’ll paint both buildings at the same time.

I’ve had people ask about plans for these buildings. I rarely make formal plans for buildings in a way that would be useful to other people, to be honest! For the dovecote I started with the article in WS&S #87 and tweaked things slightly; the farmhouse is entirely out of my head, starting with a basic idea of how large I wanted the building to be (about 5″ by 3″, as it happens) and the basic features I wanted. I have spent some time looking at photos and sketches of the real thing; the post I wrote a few years ago on half-timber architecture in the Internet Archive is still useful, as is Google Image Search for terms like “17th Century English farmhouse” and similar. A lot of buildings like this, especially rural or village buildings, could be pretty wonky and random, so it’s kind of hard to get things wrong! If in doubt, just chuck a coat of plaster over it, like real builders have been known to do!

English Civil War/Thirty Years War, Historicals, Terrain, Tutorials

Half-Timber Dovecote, Dampfpanzerwagon Style: Part One

Leave a comment

As I mentioned in my last post about the things I brought home from Trumpeter Salute, one of them was a copy of Issue #87 of Wargames, Soldiers, and Strategy, their ECW special. One of the articles in there was by Tony Harwood, also known as Dampfpanzerwagon around the internet, including on the Lead Adventure Forum.

Wanting more buildings suitable for an English Civil War game (and possibly for early 20th C pulp games set in the English countryside!) I decided to build my own version of Tony’s dovecote. It’s a great building for wargaming, having a minimal footprint but nice presence because of it’s height.

My version of Tony’s dovecote has walls 60mm wide and a total footprint, including minimal base, of about 65mm by 65mm. It’s 120mm (12cm) to the tops of the walls. I haven’t actually measured to the top of the roof, but it’s somewhere around 20cm or so total height.

Dovecote started, with the finally-completed barn on the left! Click for larger.

The walls and base are 1/16th” matt board (picture framing card). The stone foundation is thin (about 1/8th” or so) styrofoam insulation, carved with an Xacto blade and pencil. The half-timbering is all wooden coffee stir sticks, most of them split lengthwise to make narrower beams.

The half-timbering took a couple of hours all told, done in bits and pieces in between household chores on a Saturday. Do the big vertical corner beams first, then the horizontals, then the infill verticals or diagonals. The pattern of the half timbering is slightly different on all four walls, which seems pretty typical of this sort of Medieval/Renaissance building!

Roof structure installed, half timbering done. Click for larger.

The central “tower” on the roof is more 1/16th matt board, 20mm a side. The sloping pieces of the main roof are lighter card, cut to fit by trial and error. The tower roof is a scrap of styrofoam insulation, cut with a fresh Xacto blade into a four-side pyramid. All eight roof surfaces will get “slate” tiles from medium weight card, and the top of the tower will get some basic detailing from card as well.

For texture in the panels between the timbers, Tony uses air drying clay in his original dovecote. Lacking air drying clay, I’m trying out stippling a fairly heavy coat of white glue over the card. I’ll slap some paint over it soon and see how it looks; the white glue I’m using currently dries very glossy which makes it hard to see how much texture I’m actually getting.

The dovecote at the far end of the table during our first games of Pikeman’s Lament. Good game, look for a proper review here sometime soon! Click for larger.

On to roof tiling and paint!

Historicals, Links, Pulp

Links of Interest, 26 April 2015

Leave a comment

A few links to get us through the weekend!

I have a moderate font-collecting addiction. Dafont is my go-to source of high quality free fonts, but I’ll pay money for the right font. Remington Typewriter is probably one of the right fonts, and it’s very inexpensive over at DtRPG for four weights, depending on how short of ink you want your typewritten text to look. Great for player handouts, props, or other documents for pulp gaming or anything WW1/WW2/early 20th C!

Dinosaurs are always pulpy, and now Antediluvian Miniatures are doing some models based on the really early concepts of what dinosaurs were thought to look like. No fast, sleek, feathered raptors here, these are big chunky cold-blooded alligator-y critters, and they look great.

Having wandered into playing Infinity a few months back, I’ve started finding and following Infinity-related blogs. Bleached Models has some good stuff, including this really nicely illustrated tutorial on blending and layering colour.

Ending on a Russian Civil War related note, the Russian-language page AviArmour has a page about the Armstrong-Whitworth armoured car with some interesting text (in Russian, but Google Translate will give you the basic idea) and some great period photos of Armstrong-Whitworths in action. Would have been nice to find that page while I was working on my own 28mm A-W from Copplestone a couple of years ago! Lots of interesting information on AviArmour, it’s well worth a browse.

Conventions, Historicals

Martin’s Photos From Trumpeter Salute

Leave a comment

My own photos from the Trumpeter Salute show over in Vancouver at the end of March are still unsorted and unedited, but Martin has gotten his photos uploaded to Flickr, so I’ll happily show them off until I get my own photos sorted out!

He’s got all of his Trumpter Salute 2015 photos in an album, if you want to see all 45 from the weekend.

We did Russian Civil War + Zombies using the All Things Zombies rules on Friday evening, but Martin didn’t have his camera with him. I’ve got some photos of that session – running over zombies with a light tank was a lot of fun…

We did modern air warfare Saturday morning and afternoon, using Martin’s great papercraft jet fighter models.

Air War C:21 - Top Gun

Air War C:21 - Gulf of Sidra Incident

Air War C:21 - Gulf of Sidra Incident

Saturday evening was my Russian Civil War game using Chain of Command/Mud & Blood rules. Four players total, two Red & two White, each side running a platoon plus supporting troops. It ended in a narrow Red victory but was close several times!

Chain of Command - Comrades & Cossacks

Chain of Command - Comrades & Cossacks

Sunday I played in a LEGO Junkyard Race which was a ton of fun; Martin was able to get into Thomas’ spectacular Battle of Kursk WW2 game, with an amazing table filled with great models.

Battlegroup Kursk - First Charge at Hill 252.2

Battlegroup Kursk - First Charge at Hill 252.2

I’ll get my own Trumpeter Salute photos sorted out over the next couple of days and posted here!