Quiet by our usual standards here on the Warbard this week of both Pi Day and the Ides of March, but I’ve been busy with a couple of small projects leading up to my Russian Civil War game in a few weeks at Vancouver’s Trumpeter Salute convention.
Russian graveyard pieces and other bits. See text for details, click for larger.
Centre foreground and most obvious, some of the Russian Orthodox crosses Archeotech made for me, going into a small graveyard to go alongside my onion-domed church. The wooden thing behind the crosses is the start of a rough wood-and-sandbag-protected train car, as a low-tech armoured train for my Russian games takes place. Behind them, six 28mm horses from Brigade Games; the RCW Cossack riders are mostly lying down in the top right corner of my cutting mat, except for the one who is currently “riding” the hood of the RAFM staff car I painted ages ago and am currently touching up.
Finally, lower right has a random scatter of Reaper fantasy figures for my next “distraction” painting project, the small side project I always have going in case I need a change of pace!
I also learned this week that the Trumpeter Wargame Club, who run the annual Trumpeter Salute convention, mentioned my RCW game as a “Featured Game” in their most recent email newsletter to members… no pressure, then!
Exactly seven days after I ordered some Orthodox crosses and a few other laser-cut bits from Archeotech, a small padded envelope arrived from the UK. Tucked into a pipe-tobacco tin were 20 of the Orthodox crosses and a pair of small rowboat kits. Amusingly, the tin still smells strongly of pipe tobacco, which combines with the faint burnt-wood smell common to laser-cut MDF in an odd but not unpleasant way.
Orthodox crosses and such from Archeotech. Click for larger, as usual
Andy of Archeotech designed them in pairs out of 1mm MDF, so you glue them back-to-back to get a squarer, cleaner edge than you’d get with a single piece of 2mm MDF. This means that you get a mixed batch of fronts and backs. It’s fairly obvious which is the front and which the back with the MDF Andy uses; one side is noticeably shinier and smoother than the other.
I’ve assembled two of the crosses already, and tacked one of them onto a penny just to get it upright. Scale is provided by a Pulp Figures 28mm U.S. Navy gunboat sailor, also on a penny base.
The other part of my small Archeotech order was a pair of their little rowboat kits. The laser-cut 1mm MDF bits here provide the frame and detail bits (oars and oarlocks) for a small 2″ long rowboat; you provide a strip of light card or heavy paper about 7mm wide for the sides of the boat, as detailed in the well-illustrated instructions on Archeotech’s website. This isn’t a serious figure-carrying vessel, more a small detail piece to appear alongside a dock or as a tender, to provide nautical flavour. It’s a well-designed little kit, though, and the basic idea could easily be scaled up to make a small launch or powerboat that was capable of carrying three or four 28mm figures on small bases.
As I mentioned in my first “Frickin’ Lasers” post, Archeotech is set up to do custom/semi-custom lasercutting specifically for wargamers, and to work with wargamers on designs. I’ve certainly got some things I’ll be approaching Andy about in the future!
I’ve been housesitting a relative’s place since last week, which explains the lack of posts here, but we (my brother and I) have also taken advantage of access to working space to crank out a project we’ve talked about for several years – a good, big gaming mat!
I’ve done hills, trees, buildings and all sorts of scenery bits, but they’ve always been put on top of borrowed mats, a lot of which clashed with the scenery we’d built. The base is a 6 foot by nine foot canvas painter’s dropcloth from Home Depot; we then used latex caulking tinted with brown paint and scraped on thin, then dumped generous amounts of mixed Woodland Scenics flocking on top of that and pressed it down gently.
After the caulking dries (overnight), we shook the loose flock off and gathered it for re-use. The surviving flock seems pretty solidly attached, although we’re looking into some sort of fixative to solidify it. Spray adhesive or cheap, scent-free hairspray have been suggested; some experimentation might be in order. In the meantime, the mat is usable as-is!
I’ll do a proper tutorial-style posting when I’m home and on my own computer, but here’s two photos of the beast! The figure is a 28mm Artizan pulp heroine, chosen for her red dress so she stands out at least a bit on the huge green expanse!
Most of a six by nine flocked gaming mat, drying on the garage floor. The tiny fleck at the centre of the photo is a 28mm figure!28mm figure in the vast green expanse.
Over on Lead Adventure, in a thread about some nifty laser-cut bits someone had commissioned, I randomly commented that I wanted a dozen or so Orthodox crosses for Russian scenery, didn’t think they’d be strong enough if built from bits, but couldn’t see commissioning laser-cut ones because, well, I only wanted a dozen or so.
Whereupon Andy Slater (best known as the administrator of the long-lived and fantastic TerraGenesis wargaming terrain site) contacted me; turns out he has started up a small-run bespoke lasercutting service for wargamers. If he could sell them afterward on his site, was I interested in my dozen or so Orthodox crosses?
You see more and more laser-cut terrain everytime you turn around these days, lots of it very nice indeed, but I’d honestly never considered commissioning short-run custom pieces. Andy has, though, and has set up a small laser-cutting operation with exactly that aim.
I now have a batch of laser-cut MDF Orthodox crosses (and a few other bits from Andy’s store) making their way across the world to me. You can see Andy’s photo of the crosses already, and as soon as mine arrive (probably in a week or less, the Royal Mail->Canada Post pipeline is fairly efficient) I’ll post up my own photo and finally start a few Russian cemetery pieces to go along with last year’s onion-domed church.
Finished up the new pieces of scatter terrain I started last week. Mostly, I’ve spent a lot of time the last four days or so waiting for glue to dry! Do one stage of greenery, wait for glue, next bit of greenery, wait for glue, add second coat of glue to really secure everything, wait for glue… You get the idea!
First layer of greenery, my usual mix of flock and ground foam, with coarse ground foam bushes. Click for larger.For a better idea of the heights of the tree trunks. Click for larger.
The bushes are coarse ground foam from Woodland Scenics, soaked in dilute white glue and pressed gently into place, then set aside for at least 24 hours to dry. They’re solid enough once dry you can lift the smaller pieces of terrain by them, although I don’t recommend doing this regularly!
Lichen added to the trees, caveman for scale. Click for larger.
The lichen got hot-glued into place, and I was finally able to declare these terrain pieces done!
All the pieces – three 6″ rock wall pieces, three 3″x2″ fields/gardens, five random-shaped scatter pieces. Copplestone 28mm caveman for scale. Click for larger.Lower angle to show the heights of the trees. The lefthand tree is about 4.5″ tall, the shorter two are about 3.5″ tall.
This is not a new project, just something I remembered while waiting for glue to dry on my current scenery and decided to revisit.
In September of 2009 I sat down with a bit of Milliput and some scrap wood and created the following lectern, upon which resides a Tome of Madness, filled with eldritch verses of great power and bound in the red leathery hide of captured demons. Or something like that, anyway. It was a birthday gift for my brother as he was busy painting a group of cultist figures from Pulp Figures. That pre-dates the current version of this website, so it never got featured here, although I did show it off over on the Lead Adventure Forum. Enjoy!
Having done hedgerows and fields, I wanted some rougher, more overgrown terrain, and I also wanted to start experimenting with tree creation, as trees are the one thing I’ve been lacking in my scenery so far.
I started with the last reasonable-sized offcuts of the 3mm plastic I used as the base for the fields. The rock walls are decorator’s gravel and Gorilla Glue. I mentioned Gorilla Glue briefly in the article on fields, but briefly it’s a thick glue (the colour and consistency of honey) that activates with water, and expands as it dries, foaming outward. I wet the surface of the plastic card with a damp paintbrush, ran a bead of Gorilla Glue were I wanted the wall, dumped gravel in roughly the formation I wanted, then sprayed the whole thing liberally with plain water. The expanding Gorilla Glue will fill some of the gaps between the pieces of gravel, and also fill out the bulk of the wall slightly. After it dries (a couple of hours) you can always run a second bead of glue across the top of the wall and dump more gravel on. Two layers of gravel like this will get a wall up to just over waist high on a 28mm figure, which is enough for my purposes.
The three straight rock walls are based on tongue depressors, so 6″ long and about 3/4″ wide. The three small fields/garden bits are old credit card sized gift cards I had lying around, with the raised beds and plow furrows done with hot glue. The larger pieces are all from the 3mm plastic card offcuts, the longest being about 8″ long, the triangular piece about 4-5″ a side.
Gravel and Gorilla Glue for rock walls. Click for larger.
The trees are fairly heavy wire (sold in local hardware stores as “utility wire”, I seem to recall) bent and folded with pliers, then glued down with hot glue. Once they’re secured, I used more hot glue to bulk out the trunk and major branches. Everything – ground and trees – got slathered in white glue and had sand dumped over it at this point.
Rock walls done, on to tree trunks, then sand over everything. Click for larger.
After the sand had dried overnight, everything was basecoated with dark brown paint, mixed randomly with a bit of black paint. The rock walls got straight black as a basecoat. All my basecoats also have a healthy dose of white glue mixed right on each piece to secure the sand and gravel.
Basecoat – brown over everything but the rocks, which get black. Click for larger.
Last bit of painting is a pale brown/tan drybrush over the dirt and trees, dark grey then pale grey/white over the rocks, and finally a pale grey/tan/white mix drybrushed on the tree trunks so they’re a slightly different colour from the ground.
Drybrushing done – light brown & tan on the dirt parts, dark grey & pale grey (almost white) on the rocks, final grey/tan drybrush of the tree trunks.
In Part Two, flocking, scenic foam and other scatter on the ground, lichen for bushes, shrubs and tree foliage. Coming soon!
I picked up a copy of the recently published pulp skirmish rules Pulp Alley sometime last month, and we finally got a game of it in today.
Pulp Alley is published by the father & daughter team of Dave & Mila Phipps; the $10 45-page PDF has all the basic rules for pulp mayhem, designed around teams (“Leagues” in PA) of about 5-8 Heroes, Sidekicks, Allies and Followers. I’ll likely do a full review of PA soon, but the basic rules are well-written and well-edited, with nice pulpy graphic touches throughout.
For this game I copied the sample League provided in the book, hacked together a second League quickly, then assembled two more Leagues by getting players to play mix-and-match between the two existing Leagues. This left a lot of rules and features unexplored, but as a quick-and-dirty method of assembling four not-quite-identical teams it worked OK. We got out my underused tropical buildings and a few bits of jungle terrain and got to it.
Early in the game. Air Pirates in the foreground, Sailors barely visible bottom-right, Russians in a clump top-right. Cultists are off-camera top-left. Click to view on Flickr.
Fairly late in the game. My Air Pirates are mostly down, the Cultists have forted up in the lefthand building, and the Russians and Sailors are brawling in the street to the right. Click to view on Flickr.
I’ll be writing up a proper review of Pulp Alley sometime soon, probably in a few weeks after we have another couple of games. The initiative system is different and interesting, with initiative changing hands based on winning fights or capturing objectives. The Fortune Card deck is a great idea and added quite a lot to the game, especially a few turns into the scenario when we were all a bit more comfortable with the rules. The combat system is elegant, although I can tell I need to stop at my FLGS to get a few more d8s before our next game. Before next weeks game I want to properly build several Leagues to get a better idea of the character and League creation rules; there’s also several questions I’ll need to ask over on the Pulp Alley forums, mostly to do with wounding and recovery from wounding, which we got slightly confused by!
It was great to get back to pulp gaming again, and I’m looking forward to getting more familiar with the Pulp Alley rules.
As part of an order that arrived this week from Brigade Games I picked up one of 4Ground’s neat looking laser-cut carts. This one is “28-CAW-303 C19th C Horse Drawn Utility Cart”, known on 4Ground’s own site simply as “Horse Cart”! I’ve been meaning to get some of these 4Ground carts & wagons for ages, as carts and wagons are nearly universal scenery and the pewter & resin ones out there tend to go for larger sums than I usually want to spend on waht i
It comes as a 8’x3′ sheet of 2mm MDF, laser-engraved on both sides, with the parts laser-cut except for very tiny sprues holding them into the sheet. There’s an A4 sheet that is both package label and (black and white) instruction sheet. The instructions are all photo illustrated, over a dozen small but clear B&W photos taking you through the assembly.
Straight from the ziplock bag- instructions at top, cart on it’s MDF sheet below. Bag topper card in the middle, just because. Click for Larger.
The parts are all marked by clearly engraved letters on the sheet, and the photos and text are more than clear enough to take you through the step-by-step assembly. I should note that there is a typo in the last sentence of the written instructions, though, where the letters identifying two parts are duplicated. The photos are clear enough, and by that point you’re down to so few parts it’s reasonably obvious where things are supposed to slot in.
Finished, with a 28mm Copplestone caveman for scale. Click for Larger.
The finished cart is actually fairly substantial. The body is about 2″ long and 1.5″ wide; the whole cart from tailgate to front of the arms that hold the draft horse is 3.5″ long, 2″ wide across the wheel hubs and 1″ high when sitting level. Resting forward on the arms (what are these pieces actually called? I’m sure they have a name in a real cart…) the back end of the cart is about 1.25″ tall.
Front & side views of the cart. Click for Larger.
I’ve not yet decided how I’m going to, or even if I’m going to, paint this up. I think I’ll experiment this weekend on the offcut pieces of MDF and see how it reacts to washes and other paint. A grey wash and a bit of off-white drybrush might be all it needs to weather the wood a bit and give it a well-used appearance.
Quick photo of my work-in-progress Renedra gravestones, purchased over Christmas from J&M Miniatures. The bases are leftovers from my long-neglected English Civil War/Thirty Years War forces, which are Warlord sets and come to think of it, also cast by Renedra.
Quick and rough late night snapshot of half the Renedra graves. Click for slightly larger.
This is half (one of two identical sprues) of the Renedra gravestone set, and spread out to allow figures between the bases, it comfortably fills my 11″x9″ cutting matt. Adding the second sprue and some other bits like trees and such would give you an extensive graveyard to skulk in!
