All posts by Brian Burger

Started this site way, way back in November 1998, when the web was young. It's still here, and so am I.
English Civil War/Thirty Years War, Terrain

Half-Timber Barn, Finally Finished!

2 Comments

Way back in June of 2011, I started a fairly small half-timber barn for 28mm, for either my ECW/TYW stuff or early 20th C pulp gaming.

I’d gotten most of the painting done on the building six years ago, then moved on to other projects as the 16th C ECW/TYW gaming failed to grab my attention. The barn has floated around the edges of my painting bench, almost but not quite finished, ever since.

Earlier this week I was off sick and needed something sedentary and easy to do, so I pulled the barn out and started adding doors, some final paint touchups, and flocking and terrain around the outside of the walls. I’d originally planned, long ago, to do hinged arched doors on the big front doorway of the barn, but decided that six years of not figuring out how to do that in a wargamer-proof way was long enough and have gone with simple closed doors across the back of the arch!

Here’s what it looked like back in June 2011:

barn01
A stone-and-halftimber barn, work in progress. Click, as usual, for larger.

Here, all finished and detailed, is the barn in April 2017!

The big front door is wooden coffee stir stick planks over an offcut of picture framing card (matt board), cut to size, and then roughed up with sandpaper, an Xacto knife, and a razor saw. The back door is just card, with planks scored into it with the back of an Xacto knife. The hinges on both are scraps of light card painted with Tarnished Steel. Both doors got all-over washes with several different colours of wash, including green on the front door to stain the wood.

The roof is towel thatch (this was the first thatch building I’d ever done!) with thin foam for the stonework on the bottom half of the walls. The greenery is a mix from all over, including the nice red flowers from Rain City Hobbies over in Vancouver.

For more details on building the barn, check the two 2011 articles I linked to right up in the first paragraph of this post, there’s lots of detail there.

Nice to finally get this building done and dusted after nearly six years of three-quarters finished limbo! Now I need to consider other buildings for an English Civil War or Thirty Years War hamlet… some cottages, maybe a version of the interesting dove cote seen in the ECW edition of WS&S I picked up at Trumpeter Salute. We shall see!

Conventions, Fantasy, Galleries, Infinity, Science Fiction

LANtasy 2017 Photos!

2 Comments

Our local “big” convention, LANtasy, was a couple weeks ago now. I participated in the Blood Bowl & Infinity tournaments all weekend, and my Infinity terrain made up two of the four tables in the Infinity tourney. We’d hoped for more players and had originally reserved space for up to eight Infinity tables, but six players was it. I managed to come dead last, by a fairly good margin, including conceding one game at the bottom of the second turn (of three) but they were good games on good tables!

I brought my Lizardman team, the Handbag Factory (they’re crocodile figures, hence the joke name) to the Blood Bowl tourney and did nearly as badly, including one game where I got six lizards including my Kroxigor killed and didn’t injure a single orc…

Some photos – see captions for details.

Trumpeter Salute 2017 was last weekend in Vancouver and was a lot of fun. Lots of different games, a chance to see folks I only ever see at Trumpeter, and I ran a Pulp Alley game that was a blast and greatly enjoyed by all six players. I haven’t processed the photos from that yet, so I’ll do another post this weekend about that show.

Conventions, Pulp

Trumpeter Salute 2017 This Friday!

Leave a comment

Bit quiet around here but I’ve been busy painting up a storm for my Trumpeter Salute 2017 game!

“The Faithful of Dagon” will feature several competing sects of fishmen, some human cultists, and various other factions all competing to recover things Man Was Not Meant To Know, all powered by the Pulp Alley rules. Look for it Sunday morning at Trumpeter Salute.

I’ll get the WordPresss app reinstalled and running on my smartphone before Trumpeter and try to show off some photos and such from the show, but I’m on a holiday road trip right until Friday when I rock up to Trumpeter, so posting is going to be light until then.

See you at Trumpeter, hopefully, and hope March was a productive wargaming month for you like it was for me.

Painting

In Which Painting Mojo Is Rediscovered

Leave a comment

While I’ve built various bits of scenery over the last few months, the last figure I painted to completion was the massive Maghariba Guard TAG which was finished before the end of October.

There’s been a dozen or more Infinity figures and a scattering of other stuff on my workbench this whole time, but the only figures I’ve painted have been the six goblins for the Blomp, five of which were really simple paint jobs, really just two colours and some washes! My painting mojo has been in hibernation all winter…

Then Lead Painters League 11 was announced over on the Lead Adventure Forum. I’ve participated in previous LPL rounds but not for a number of years now – LPL3, LPL5, LPL7 – so I wanted to get back into that particular groove, and allows me to continue my “tradition” of participating in odd-numbered LPL rounds.

I realized that if I dug into my lead mountain stockpile of figures I could do every single round of this LPL including meeting the three bonus rounds (Tribes, Ship’s Crew, and Big Brother/Little Brother) without having to buy a single figure, and by pulling out figures I’d started to paint years ago then abandoned I could reduce the painting load considerably!

The first thing I did, though, was clear all the Infinity figures off my workbench. They’ll be back, no worries, but I realized that my painter’s block was at least partly linked to the fact that for most of the last two years nearly all I’ve painted has been Infinity figures for one faction. They’re lovely figures and I’ve done a lot of painting on them I’m happy with, but a massive changeup was clearly needed!

The workbench this week! Click for larger, details in text.

I pulled a whole mix of stuff out, began working on it, and the painting mojo came roaring back! There’s some Warlord ECW/TYW figures, a mix of figures from Pulp Figures, some fishmen types from Reaper, and a few other things from other manufacturers. I’ve applied more paint to more figures in the past five days than I have in the past four months!

Part of this painting spree will see the table at Trumpeter Salute 2017 at the end of this month – more on that in another post soon.

Infinity, Links, Painting, Science Fiction, Terrain, Tutorials

Links of Interest, 24 Feb 2017

Leave a comment

Last time I mentioned a couple of YouTube painters that had good series of to-the-point, well-edited painting videos. Victor Ques is another I should mention; his ongoing “Weekly Painting Tips” series just hit episode 100 and has lots of good content. For his 100th episode he did a really nice 15 minute video talking about when to use some of the techniques he and other painters talk about; it’s a really good overview to accompany the technique-specific videos he’s already done.

Victor Ques’ recent video on painting techniques.

Painting Buddha doesn’t seem to be producing videos anymore, but they had a really high-end multiple camera setup, with a camera on the miniature, a camera on the palette (so you can see how colours are mixed and thinned) and a talking-head camera. Their painting black armour tutorial is well worth watching, even if it’s more advanced and involved than a lot of us are going to do regularly!

A few quick links to finish off with!

Bricks’n’Tiles is a small Windows program to create endless, seamless brick, tile, and other textures for creating paper or card buildings with, but even if you don’t use Windows or don’t feel like you need to buy the program, they have some sample sheets downloadable from their website that are potentially useful.

Free Islamic Calligraphy has a lot of high quality graphic files of Islamic calligraphy, including the awesomely sci-fi looking Kufic style. Lots of good stuff if you want to add some easy Islamic (or Haqqislamic, for Infinity players!) flavour to your scenery.

Infinity, Science Fiction, Terrain

More Jungle To Rumble In

Leave a comment

Scored another big paper towel roll from our recycling bin, so I decided to make a fallen tree instead of another upright one.

Like the other trees, the fallen tree started with a paper towel roll, scrap cardboard, some CDs, and my hot glue gun. I made the root ridges lower so the tree would sit mostly level, and glued on a few random bits of cardboard to break up the surface of the paper towel roll a bit. All the ridges are made of two strips of cardboard, so they’re a bit thicker.

Tree assembled, with Infinity Ghulam light infantry on a 25mm base for scale. Click for larger.

I used a pair of CDs as a base, and didn’t bother filling in the gap between them.

Right after assembling the fallen tree (I love hot glue, there’s no waiting for glue to dry or cure!) I got to work with white glue, some paper towel, and toilet paper for bark texture. I filled in the two ends with scrap cardboard and a bunch of paper toweling, added some ridges of paper towel here and there, then covered the whole thing with toilet paper, pushed into place with a damp brush and sometimes my fingers, with extra white glue drizzled on as needed to make sure everything was well stuck down.

Bark texture done with toilet paper. Click for larger.

That needed to dry overnight, so the next evening I got the basecoat done, mostly brown paint with a bit of black and some tan to add a bit of variation, with a squirt of white glue mixed in for extra strength.

Basecoat all done, still wet. Click for larger.

After the basecoat had dried overnight again, I did some drybrushing with tan and white paint to bring the bark texture out, then splodged on some green paint in two different shades here and there. That didn’t really need any drying time, so I got the hot glue gun out again and the box of random plastic plants and other greenery. I finished the fallen log off with a mixed batch of plants and foam, then ground foam grass over the base and here and there on the log as well, and declared it done!

Finished fallen log, same Infinity figure on 25mm base as the other photos. Click for larger.

The finished piece is about 9″ long, 3″ wide, and 2.5″ tall. I’m looking forward to adding it to my jungle themed tables!

Fantasy, Terrain

BS2017: The Bloodyear Blomp, Part 8

Leave a comment

Blomping along…

Primer! Got the gondola spray-primed grey and the balloon envelope brush-primed black.

All primed up, except the base. Click for larger.

The LAF Build Something 2017 contest rules ask that you not post painting progress photos of your project past the priming stage, so this will be the last photo anyone sees of the Blomp itself for a while. I’ll try and remember to take some in-progress shots and save them for a post-contest photo gallery, though.

Up next is finishing the base with a bit more putty and then paint and flocking, and then working on the half dozen or so goblins who are going to be crewing this thing!

Deadline is Feb 18th, which is coming up awfully fast!

Infinity, Pulp, Science Fiction, Terrain

In the Jungle, the Mighty Jungle…

1 Comment

Several years ago now I did a whole banker’s box full of jungle terrain, but it was all fairly low-lying stuff, thickets and bushes and that sort of thing.

I’ve always intended to add some bigger trees to the set, inspired by the nice trees DM Scotty does in this video…

[su_youtube url=”https://www.youtube.com/watch?v=bJ-ZvGMnTIM”]

…and Dr. Mathias’ extravagantly photographed jungle tree tutorial over on Lead Adventure forum!

Our paper towel dispensers at work are the large commercial models, and staff are expected to refill them on their own when they’re emptied, so I’ve brought home a few of the heavy cardboard tubes from the centres of the big rolls of brown paper towelling, as well as a couple of lighter tubes from home, and a few shorter toilet paper tubes.

This weekend I sat down to crank out a few trees! I started with the hot glue gun, the tubes, some CD-ROMs salvaged from the recycling bin, and some scrap cardboard to produce four trees and one big stump.

Fourth tree and stump all covered in paper towel. Three other trees drying in the background. Click for larger.

The three big trees and the stump basically fill the entire CD base edge to edge, with space between the buttress roots for figures to duck for cover. The smaller tree (from a tube that originally held glow-ropes) covers about half the CD it’s on.

I used lots of white glue to attach a layer of brown paper towel to the trunks, let that dry, then slapped on a base coat of reddish-brown and black mixed. After that dried I gave the trunks a heavy drybrush of tan, then blotches of two different shades of green here and there to suggest moss or jungle fungus.

Basecoated trees drying, before drybrushing and foliage. Click for larger.

After that had mostly dried I broke out my box of random plastic plants, gathered from craft stores over the last couple of years. Vines, random bushes, and some low-lying lichen filled some of the gaps around the trunks and provided some colour, then I put a generous layer of flock around the bases and declared these things done!

All flocked and foliaged. The white primered figure in the lower-right is an Infinity Ghulam infantry on a 25mm base. Click for larger.

Stump speech! Using the toilet paper roll for a giant stump gives the tabletop some vertical tactical possibilities, which always makes games more interesting. Click for larger.

It’s nice to have a quick down-and-done project, sometimes, and I’m really pleased with how these all came together. Looking forward to getting them onto a table for a pulp or Infinity game!

Fantasy, Terrain

BS2017: The Bloodyear Blomp, Part 7

Leave a comment

Greenstuff all over the place this time!

Base greenstuff work – on the troll, the barrel, and the base itself. More to come! Click for larger.

I’ve started on the heavy leather harness that the troll uses to tow the Blomp along, as well as structural greenstuff to secure and cover the magnets in his base, hold the barrel in the right position, and secure the steel plate the barrel magnetizes to.

There’s at least one more round of greenstuff here, the front and belt parts of the troll’s harness don’t exist yet, and the base needs some more patching up.

Greenstuff on the piping around the Engine. Click for larger.

Up on the gondola the various joints in the pipes have greenstuff seals added. I’ll be painting them up as leather, which has historically been used as a seal and still is to this day in some applications. I also smoothed out a few parts of the hull, and on the first photo above you can see the putty filling in the underside of the bridge wings to secure the three eye-bolts on each end.

The eye-bolts are jewelry making supplies, intended to be posts on earrings or something. I have a little baggie of dozens of them, and I think they’ll come in handy for all sorts of things – parts of railings, for example. It pays to cruise slowly down the random aisles of your local craft store, the jewelry and bead aisles are full of all sorts of interesting things!

The greenstuff work on the gondola means it’s finally ready for priming and painting. I didn’t get a photo but the fabric patchwork is also finished on the balloon, so painting will start on that this weekend. I also need to get stuck into the (mostly minor) conversions to the half dozen Reaper Bones goblins who will serve as crew!

The Feb 18th deadline looms like an irritated troll with a big club!

Fantasy, Terrain

BS2017: The Bloodyear Blomp, Part 6

Leave a comment

Progress, the purpose of the troll revealed, and IT FLIES.

Well, sort of!

I got most of the structural parts of the base done today, barring more greenstuff putty to solidify everything. The big troll – an old prepainted WotC figure that I’ll be repainting – has a hole drilled between his shoulder blades and one end of a length of heavy steel wire inserted. The wire goes up to a detachable section of keel on the underside of the Blomp gondola, then comes back down and ends in the small barrel behind the troll.

There’s four rare earth magnets in the troll’s base, one in the bottom of the barrel, and two more in the keel piece at the top of the wire. Everything seems solid enough to hold the thing up, although I did have to shorten the wires from their original height because everything was flopping around like a lying orange liar’s toupee in the wind.

The Blomp’s base, with ground crew troll. I’ll use greenstuff to add a heavy leather harness around him. Click for larger.

Here’s how the whole thing looks at present! Since this photo I’ve added more to the keel assembly at the top of the wires, which strengthens and stabilizes everything a bit more.

The entire assembly at present. It flies! Click for larger.

I’ve also added wires disguised as piping on the gondola, coming out of the central Improved Non-Explosive Flautulator Engine. The piping into the lower part is largely decorative, but the upper piping will be the structural supports connecting the gondola to the balloon envelope overhead.

The plumbing going in around the Improved Non-Explosive Flautulator Engine. See text for details; click for larger!

I’ve also gotten almost all of the fabric glued on to the Blomp’s envelope, but didn’t get a photo of that.

The next round is going to be more greenstuff putty action on the plumbing, base, and troll. I also need to get started on converting Reaper Bones goblins for camera operators, flight crew, and famous Blood Bowl announcer & personality Gobb Cherry, host of BB Nite in Gobada! I’m looking forward to puttying and painting a suitably loud suit and tie onto Gobb!